Sunday, August 26, 2012

HG MSN-04 Sazabi EVO (Go Go)



Finally, GOGO 2nd kit, the long awaited HG 1/144 Sazabi EVO ;)

Manufacturer: GOGO
Scale: 1/144
Grade: HG
Origin: Char's Counter Attack
Price: RM90 (Contact me at duelmasterng@yahoo.com for latest price and availability)

Please take note that I did panel lining with Gold marker ;)


The Box

The box art, and comparison with Gao Gao Sazabi normal ;) The EVO box is a little taller.





Section 1: Runners

Detailing are very good! Since this is not a direct replication from Bandai, there's nothing to compare with :P The plastics is a bit softer than the usual Gao Gao quality ;)













Section 2: Decals & Accessories

This kit comes with 1 set of water decal, yes, water decal ;) There's no specific instruction where to apply the decals so it is up to your decision.




Section 3: The Legs

Parts separations are FANTASTIC, with very good detailing!

Not much to talk about in the knee articulations but Go Go uses the dual-joint for the hip instead of the ball-joint employed by Bandai, and its a good improvement ;)

Do take note that GOGO is providing exchangeable knee parts for those who don't like the emblem version.




Exchangeable Knee Parts



Compare to Bandai's Sabazi on the left, EVO's legs are a little bit longer but slimmer :P




Section 4: Waist

The waist and front skirt is pretty straight forward, but there's also some strange move for Go Go on the side skirts... The side skirts, instead of attaching to the waist unit, they are attached to the body...

As for the back skirt, Go Go did excellent parts separation thus meaning many parts to assemble :P


Front Skirt & Waist Unit



Bandai left, GOGO right ;)




Back Skirt



Bandai left, GOGO right ;)




Side Skirts



Bandai left, GOGO right ;)




Section 5: Chest

A sexy chest GOGO have made for this EVO ;)

I am showing the emblem version of the chest, but there are exchangeable parts to change it back to the red color plain chest ;)

Recommendation: The energy pipe for the Mega Particle Cannon tends to fall off... glue them instead ;)

One very strange design for this section... the side skirts are actually attached to the lower abdomen section instead of the waist unit below the energy pipe, and they does affect the waist movement...





Exchangeable Chest Parts



Bandai left, GOGO right. The EVO chest looks more like Sinanju :P





Section 6: Arms & Shoulders

Articulations are pretty standard for HG, but the parts separations and detailing are just amazing. Same to the chest and legs, GOGO provided exchangeable parts for the wrist if you don't loke the emblem version ;)



Exchangeable Wrist Parts



Bandai left, GOGO right. The EVO arms are smaller then the original :P





Section 7: The Head

Parts separations is still good, but I have got to give my point here to the Bandai version as the GOGO EVO version does not have the monoeye mechanism.

Recommendation: Glue the helmet with the top of the head, if you know what I mean :P





Bandai left, GOG right. I like the design of the EVO but not happy that it does not have the monoeye mechanism!




Section 8: Backpack

Pretty neat backpack... I just hope that the fuel tanks are larger ;)

As for the bits, Bandai does give 6 units of deployed bits but GOGO does not have them, and instead GOGO provided 2 sets of 6 undeployed bits for you to choose, with 1 set open top and the other set closed top...

I find that the original version is more solid, but the EVO version is better looking :P





Bandai right, GOGO left ;)





Section 9: Weaponry

EVO's Beam Rifle (right & bottom) is much better, period ;)



Bandai left, GOGO right. The EVO shield is a little smaller but with very nice detailing ;)




Bandai left, GOGO right. GOGO really dropped the ball here by doing a half pass six beam axe and not providing the beam effect :(




Section 10: EVO Vs. Normal

Lower Body



With Chest



Full Body Except Backpack




Section 11: Action Pose ;)

A bit lazy to apply the decal yet...











Quick Review

Plastic Quality and Detailing

The plastic quality is softer than the usual Gao Gao/TT Hongli quality. The detailing are FANTASTIC and I love this kit. Very nicely done by GOGO but sadly they dropped the ball on the Beam Axe section.

Nevertheless, I would still highly recommending this kit ;)



Articulations

Articulations are at most decent to HG level... Althought this is not the major determining factor for getting this kit, but I'm still putting down some comments ;)
  • Head/Neck: Pretty standard for a HG. The "helmet" pretty much preventing large movement so head/neck articulation is pretty meaningless :P
  • Shoulder: Excellent! With pull-out mechanism allowing more dynamic posing.
  • Arm/Elbow: Normal elbow articulation bendable to 90 degrees.
  • Wrist: Normal.
  • Waist: Bad.
  • Skirt Armour: Strange design... the side skirts are actually attached to the lower abdomen section instead of the waist unit below the energy pipe, and they does affect the waist movement...
  • Hip/Tight: Excellent!.
  • Knee: Normal-... same to the Bandai version, only up to 90 degrees.
  • Ankle: Normal-.

Looks and Feels

The detailing is EXCELLENT! The snap-fit is also very nicely done although some parts in the instruction manual is wrong :P

The 2 disappointments are: -
  1. The strange design of the side skirts that are attached to the lower abdomen section instead of the waist unit, and they affect the waist movement, and
  2. The badly finished Beam Axe with no beam effect part.
Overall, this kit is still very nice and a must-have for Sazabi/Char fans ;) Unless you want to pay for a Resin kit, do get this model ;)


Fin :)




8 comments:

  1. what kind of gold marker did u used for panel lining? coz gundam marker gold just too big for the tip. can u show me the link for that gold marker u used for panel lines? thx/

    ReplyDelete
    Replies
    1. http://duelmasterng.blogspot.com/2012/05/tutorial-panel-lining-with.html

      Delete
  2. very nice review and I love your gold marker too,, and mine still nowhere T T

    ReplyDelete
    Replies
    1. You can always get this Sazabi EVO from me if you are in Malaysia ;)

      Delete
  3. I did a very stupid mistake of cutting the round peg at the underside of the horn... one thing left to do...

    Superglue~~

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. hello there~~~~ nice review ^^ gotta buy this kit! uh can you tell me exactly the size of this kit in inches or cm?

    ReplyDelete